RCModelScout.

ReadyMadeRC

OSD PRO EXPANDER

All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder,

ReadyMadeRC

FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM

FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,

ReadyMadeRC

SWITCH-MODE SMART BEC WITH LITHIUM CUTOFF

Weight:, 7.0g / 0.25oz, Model:, SmartBEC, Specifications:, Applications:, Sport planes,

ReadyMadeRC

BOBCAT 6 CHANNEL 1.14M WINGSPAN PUSHER (PNP)

*Special note from RMRC: This plane flies great, but we have seen some issues with the power system and included hardware, which is why we have discounted the plane.  The user should replace the wires between the motor/esc with thicker gauge wire (we recommend 12AWG) and double check the soldering on the bullet connectors, and also should cut open a hole beside the ESC for additional cooling.  The best option would be to supply your own 80A ESC based on the results we've seen with the inclulded ESC's Double/triple check all hardware, servo wires, etc.  We are pricing this at near the kit price and losing money on these since we are not particularly happy with the included electronics, but once you get it in the air we think you'll be happy with how it flies.  We have no idea how other stores can justify charging $300 for the same plane., Some special instructions for this plane:, ,

ReadyMadeRC

HORNET OSD + FY31AP (FY-31AP TRADE EDITION)

The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes  separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,

ReadyMadeRC

FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY

Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of  flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,

ReadyMadeRC

0.91-1.68GHZ CIRCULAR WIRELESS HELICAL ANTENNA

Opposite polarization rejection is especially important in circular polarization. In a simple way: the difference between co-polar component (right hand circular in this case) and cross-polar (left hand circular) is the attenuation that will introduce the antenna to capture the reverse polarization, which will come from the reflected signal that we want to avoid to reduce multipath. In these antennas is bigger than 10dB in all cases, which means that the reflected signal will reach the emitter attenuated at least 10dB with respect to the desired signal, which is great to prevent that it interferes with the desired signal.,

ReadyMadeRC

DJI S800 EVO REPLACEMENT ARM, CCW ROTATION

S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, , Features:,

ReadyMadeRC

DJI S800 EVO REPLACEMENT ARM, CW ROTATION

S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, , Features:,

ReadyMadeRC

EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - XT60

has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers.   The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU.  The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics?   The Vector changes all that. WARNING: a full color OSD can be addictive! :)   Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, for doing acrobatics when you get bored just flying along. :) Great for holding 3D positio,

ReadyMadeRC

CIRCULAR WIRELESS 1.2-1.3GHZ RHCP PATCH ANTENNA

This is especially important in circular polarization. In a simple way (image shown in product pictures): the difference between co-polar component (blue, right hand circular in this case) and cross-polar (red, left hand circular) is the attenuation that will introduce the antenna to capture the reverse polarization, which will come from the reflected signal that we want to avoid to reduce multipath. In these antennas is bigger than 12dB in all cases, which means that the reflected signal will reach the emitter attenuated at least 12dB with respect to the desired signal, which is great to prevent interference with the desired signal.,

ReadyMadeRC

EZUHF 8 CHANNEL LITE RECEIVER

ReadyMadeRC

EZTRACKER ANTENNA TRACKER

,

ReadyMadeRC

IMMERSIONRC - TINY TELEMETRY

ReadyMadeRC

FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM

,